Nic's Fix

Is your Apple HomePod's mesh looking bad? Maybe you just want to add some flair? No special skill or tools required!

Pick three things:

1) FIT - how it goes on
- Slip-over: goes on over your original mesh. Nothing to remove.
- Replacement: replaces your original mesh. You remove the old mesh first.

2) STYLE - how it's made
- One piece: a single piece that slides on.
- Two halves (+$10): two halves you join together on the HomePod.

3) COLOR
Choose from the colors I have on hand - some change color with heat, and one glows in the dark. Want something else? Any color that plastic comes in can be done, from multi-color to color-changing with light or temperature. Pick "Custom color" (+$20), tell me what you want, and I'll special order the filament for you. Custom colors take longer, since the filament has to arrive first.

Refurbished with new DC filters, no-power diode, and a new nitrile subwoofer gasket. One-year warranty and USA shipping included. Currently out of stock - you can also send in your own HomePod for repair.

Choose any color from Rit's DyeMore lineup - optionally dye the top and cable too, and pick how deep you want the color. One-year warranty, USA shipping included.

Made-to-order dock for the 1st-gen HomePod (A1639) NOT FOR SECOND GEN OR MINI! Comes with Philips screws and a USB-A to C adapter. Attempt your own software restores and play with hidden USB functionality!

GET GOING WITH THE RESTORE GUIDE BEFORE SPENDING MONEY: https://github.com/UnbendableStraw/homepod-restore/

The UART option simply adds three exposed wires; TX, RX, and GND, for you to connect your own (USB to) serial adapter for UART connection to the HomePod. Only select this option if you are familiar with UART and will use it! This option will NOT increase your chances of a successful software restore.

Free with any order or repair! Snag a random color limited run of my custom HomePod-shaped business cards. The Mini happens to fit snug and perfect in the base of your big HomePod! If you're lucky, you'll get a soft, foam mesh version of the card.

Aftermarket replacement touch panel assembly by TechNerd for Apple HomePod 2nd Gen (2023, A2825). Resolves ghost touch: random playback, accidental Siri activation, unresponsive volume keys.

Key Features:
• TechNerd aftermarket touch panel assembly
• Cross-reference OEM part numbers: 821-03845-03, 821-03845-A
• Our touch sensor marking: YK1750A / TSC3825
• Uses OCA optical adhesive lamination, the same type of bonding technology utilized in original factory panels
• FPC gold-plated contacts; flex cable reinforced with bonding glue. Double-sided adhesive provides shock absorption between panel and sensor
• Eliminates ghost touch, phantom playback and volume control failure
• Integrated flex cable for direct plug-in installation
• Brand new, 100% inspected unused parts
• Continuous bulk supply for electronics repair shops

Technical Parameters:
• Dimensional tolerance: ±0.2 mm
• Unit weight: 3.2g (with film), 2.1g (film removed)
• Operating temperature: 32°–95°F (0°–35°C)
• Humidity: 5%–90%, noncondensing
• Max tested altitude: 10,000 ft (3000 m)
Stable conductive performance for long-term equipment repair.

Compatibility:
Fits Apple HomePod 2nd Gen (2023, A2825)
Note: Confirm speaker model before purchase. Our sensor marked YK1750A / TSC3825 for identification.

What's Included:
1 × TechNerd touch panel assemblies with flex cables
Condition: New

Installation Notes:
• Required tools: heat gun, T6 Torx screwdriver, spudger, guitar pick
• Professional disassembly skill required
• Original panel permanently laminated with OCA optical adhesive. Moderate heating required for safe removal
• Fast processing, shockproof packaging
• Returns accepted only for manufacturing defects
⚠️ Damage caused by improper disassembly or installation cannot be returned.

Disclaimer: Aftermarket replacement part, not official Apple product. OEM part numbers for compatibility reference only.

Repaired and tested. One-year warranty; US shipping covered for the first 6 months.

Currently out of stock. Source a broken HomePod that won't power on or has bass issues - these usually have a good logic board.

OEM 820-00965-03. Re-usable adhesive. Tested and confirmed working. For 1st Generation Apple HomePod

Model ADP-60EF S (2949022004). All PSUs are 110-220V.

OEM 820-00632-03. Re-usable adhesive.

OEM 821-00834-04. Comes with mic screens. Same part for either side.

Having a tough time reaching that one screw between the two tall capacitors on your 1st gen HomePod amp? Can't find anything that'll reach those recessed screws inside the speaker basket of a 2nd gen pod? This bit makes the job trivial! Avoid breaking stuff and stripping screws you can't reach with most tools. This is the same bit I use on a daily basis on all my HomePod repairs. Fits any 4mm hex shank (like your iFixit screwdriver)

Used, tested, working Sonos s16 amplifier. Has not been repaired or disassembled. In beautiful shape with minor signs of wear. NEWEST VERSION OF THIS AMP IVE SEEN! You will need your own power cord and speaker plugs. 2 year warranty.

Replace the old foam subwoofer gasket inside your 1st Generation Apple HomePod with something far better! Designed to get rid of the rubber grommets around the subwoofer screws, while proving a superior and longer-lasting seal than the factory foam. This also protects the woofer against being bent as a result of drop damage.

NON-WORKING DONOR AMP BOARD for 1st generation Apple HomePod. Don’t count on fixing it, but it can be a source for hard to find board components or practice for your real repair. Let me know if there is a specific component you need and I’ll make sure it’s present.

Tested and in good working order.

Tested and in good working order.

OEM 821-00548-07. Limit one per person.

OEM 821-01259-04.

OEM 43025.

OEM 43645. Power a HomePod while disassembled - plug one end into the PSU and the other into your original power cord.

For first-gen Apple HomePod. This connector is very fragile and can easily be broken off the board if not careful. The plastic will melt if you do not properly replace it…i suggest heating the board from underneath to reflow the connector back on.

Choose a cosmetic grade. US shipping +$5.

Choose a cosmetic grade. US shipping +$10.

US shipping +$7.